Implementation Guide
ePA Common
Version 1.0.5-ballot.1 - draft

Resource Profile: EPAOperationOutcome - Detailed Descriptions

Draft as of 2025-02-14

Definitions for the epa-operation-outcome resource profile.

Guidance on how to interpret the contents of this table can be found here

0. OperationOutcome
Definition

A collection of error, warning, or information messages that result from a system action.

ShortInformation about the success/failure of an action
Comments

Can result from the failure of a REST call or be part of the response message returned from a request message.

Control0..*
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
2. OperationOutcome.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
This element is affected by the following invariants: ele-1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. OperationOutcome.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
This element is affected by the following invariants: ele-1
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Standard StatusNormative (from Normative)
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on OperationOutcome.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. OperationOutcome.issue
    Definition

    An error, warning, or information message that results from a system action.

    ShortA single issue associated with the action
    Control1..*
    This element is affected by the following invariants: ele-1
    TypeBackboneElement
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. OperationOutcome.issue.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. OperationOutcome.issue.severity
    Definition

    Indicates whether the issue indicates a variation from successful processing.

    Shortfatal | error | warning | information
    Comments

    This is labeled as "Is Modifier" because applications should not confuse hints and warnings with errors.

    Control1..1
    This element is affected by the following invariants: ele-1
    BindingThe codes SHALL be taken from IssueSeverityhttp://hl7.org/fhir/ValueSet/issue-severity|4.0.1
    (required to http://hl7.org/fhir/ValueSet/issue-severity|4.0.1)

    How the issue affects the success of the action.

    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Indicates how relevant the issue is to the overall success of the action.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. OperationOutcome.issue.code
    Definition

    Describes the type of the issue. The system that creates an OperationOutcome SHALL choose the most applicable code from the IssueType value set, and may additional provide its own code for the error in the details element.

    ShortError or warning code
    Comments

    Note that FHIR strings SHALL NOT exceed 1MB in size

    Control1..1
    This element is affected by the following invariants: ele-1
    BindingThe codes SHALL be taken from IssueTypehttp://hl7.org/fhir/ValueSet/issue-type|4.0.1
    (required to http://hl7.org/fhir/ValueSet/issue-type|4.0.1)

    A code that describes the type of issue.

    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Expresses the issue in a human and computer-friendly way, allowing the requesting system to behave differently based on the type of issue.

    The required element provides a base level of computable interoperability across all systems for processing an outcome, allowing systems to respond appropriately regardless of the internal system error codes returned.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. OperationOutcome.issue.details
    Definition

    Additional details about the error. This may be a text description of the error or a system code that identifies the error.

    ShortAdditional details about the error
    Comments

    A human readable description of the error issue SHOULD be placed in details.text.

    Control10..1
    This element is affected by the following invariants: ele-1
    BindingThe codes SHALL be taken from For example codes, see EPA OperationOutcome Value Sethttp://hl7.org/fhir/ValueSet/operation-outcome
    (required to https://gematik.de/fhir/epa/ValueSet/epa-operation-outcome-vs)
    TypeCodeableConcept
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. OperationOutcome
    2. OperationOutcome.issue
    4. OperationOutcome.issue.severity
    Must Supporttrue
    6. OperationOutcome.issue.code
    Must Supporttrue
    8. OperationOutcome.issue.details
    Control1..?
    BindingThe codes SHALL be taken from EPA OperationOutcome Value Set
    (required to https://gematik.de/fhir/epa/ValueSet/epa-operation-outcome-vs)
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. OperationOutcome
    Definition

    A collection of error, warning, or information messages that result from a system action.

    ShortInformation about the success/failure of an action
    Comments

    Can result from the failure of a REST call or be part of the response message returned from a request message.

    Control0..*
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    2. OperationOutcome.id
    Definition

    The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

    ShortLogical id of this artifact
    Comments

    The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

    Control0..1
    Typeid
    Summarytrue
    4. OperationOutcome.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeMeta
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. OperationOutcome.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    This element is affected by the following invariants: ele-1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. OperationOutcome.language
    Definition

    The base language in which the resource is written.

    ShortLanguage of the resource content
    Comments

    Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

    Control0..1
    This element is affected by the following invariants: ele-1
    BindingThe codes SHOULD be taken from CommonLanguages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    Typecode
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. OperationOutcome.text
    Definition

    A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

    ShortText summary of the resource, for human interpretation
    Comments

    Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeNarrative
    Alternate Namesnarrative, html, xhtml, display
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. OperationOutcome.contained
    Definition

    These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

    ShortContained, inline Resources
    Comments

    This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

    Control0..*
    TypeResource
    Alternate Namesinline resources, anonymous resources, contained resources
    14. OperationOutcome.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension
    Standard StatusNormative (from Normative)
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on OperationOutcome.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 16. OperationOutcome.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      This element is affected by the following invariants: ele-1
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Standard StatusNormative (from Normative)
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on OperationOutcome.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 18. OperationOutcome.issue
        Definition

        An error, warning, or information message that results from a system action.

        ShortA single issue associated with the action
        Control1..*
        This element is affected by the following invariants: ele-1
        TypeBackboneElement
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. OperationOutcome.issue.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        XML FormatIn the XML format, this property is represented as an attribute.
        22. OperationOutcome.issue.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension
        Standard StatusNormative (from Normative)
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on OperationOutcome.issue.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 24. OperationOutcome.issue.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          This element is affected by the following invariants: ele-1
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          26. OperationOutcome.issue.severity
          Definition

          Indicates whether the issue indicates a variation from successful processing.

          Shortfatal | error | warning | information
          Comments

          This is labeled as "Is Modifier" because applications should not confuse hints and warnings with errors.

          Control1..1
          This element is affected by the following invariants: ele-1
          BindingThe codes SHALL be taken from IssueSeverity
          (required to http://hl7.org/fhir/ValueSet/issue-severity|4.0.1)

          How the issue affects the success of the action.

          Typecode
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Indicates how relevant the issue is to the overall success of the action.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          28. OperationOutcome.issue.code
          Definition

          Describes the type of the issue. The system that creates an OperationOutcome SHALL choose the most applicable code from the IssueType value set, and may additional provide its own code for the error in the details element.

          ShortError or warning code
          Comments

          Note that FHIR strings SHALL NOT exceed 1MB in size

          Control1..1
          This element is affected by the following invariants: ele-1
          BindingThe codes SHALL be taken from IssueType
          (required to http://hl7.org/fhir/ValueSet/issue-type|4.0.1)

          A code that describes the type of issue.

          Typecode
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Expresses the issue in a human and computer-friendly way, allowing the requesting system to behave differently based on the type of issue.

          The required element provides a base level of computable interoperability across all systems for processing an outcome, allowing systems to respond appropriately regardless of the internal system error codes returned.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          30. OperationOutcome.issue.details
          Definition

          Additional details about the error. This may be a text description of the error or a system code that identifies the error.

          ShortAdditional details about the error
          Comments

          A human readable description of the error issue SHOULD be placed in details.text.

          Control1..1
          This element is affected by the following invariants: ele-1
          BindingThe codes SHALL be taken from EPA OperationOutcome Value Set
          (required to https://gematik.de/fhir/epa/ValueSet/epa-operation-outcome-vs)
          TypeCodeableConcept
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          32. OperationOutcome.issue.diagnostics
          Definition

          Additional diagnostic information about the issue.

          ShortAdditional diagnostic information about the issue
          Comments

          This may be a description of how a value is erroneous, a stack dump to help trace the issue or other troubleshooting information.

          Control0..1
          This element is affected by the following invariants: ele-1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. OperationOutcome.issue.location
          Definition

          This element is deprecated because it is XML specific. It is replaced by issue.expression, which is format independent, and simpler to parse.

          For resource issues, this will be a simple XPath limited to element names, repetition indicators and the default child accessor that identifies one of the elements in the resource that caused this issue to be raised. For HTTP errors, will be "http." + the parameter name.

          ShortDeprecated: Path of element(s) related to issue
          Comments

          The root of the XPath is the resource or bundle that generated OperationOutcome. Each XPath SHALL resolve to a single node. This element is deprecated, and is being replaced by expression.

          Control0..*
          This element is affected by the following invariants: ele-1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows systems to highlight or otherwise guide users to elements implicated in issues to allow them to be fixed more easily.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. OperationOutcome.issue.expression
          Definition

          A simple subset of FHIRPath limited to element names, repetition indicators and the default child accessor that identifies one of the elements in the resource that caused this issue to be raised.

          ShortFHIRPath of element(s) related to issue
          Comments

          The root of the FHIRPath is the resource or bundle that generated OperationOutcome. Each FHIRPath SHALL resolve to a single node.

          Control0..*
          This element is affected by the following invariants: ele-1
          Typestring
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Allows systems to highlight or otherwise guide users to elements implicated in issues to allow them to be fixed more easily.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))