Implementation Guide
Telematikinfrastruktur (TI) Common
Version 1.1.0 - release

Resource Profile: TIPractitioner - Detailed Descriptions

Active as of 2025-05-28

Definitions for the ti-practitioner resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Practitioner
Definition

A person who is directly or indirectly involved in the provisioning of healthcare.

ShortA person with a formal responsibility in the provisioning of healthcare or related services
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Practitioner.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeidstring
Is Modifierfalse
Must Supporttrue
Summarytrue
4. Practitioner.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Practitioner.meta.versionId
Definition

The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

ShortVersion specific identifier
Comments

The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

Control0..1
Typeid
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Practitioner.meta.lastUpdated
Definition

When the resource last changed - e.g. when the version changed.

ShortWhen the resource version last changed
Comments

This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

Control0..1
Typeinstant
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Practitioner.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Practitioner.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Practitioner.identifier
Definition

An identifier that applies to this person in this role.

ShortAn identifier for the person as this agent
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Often, specific identities are assigned for the agent.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Practitioner.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • pattern @ system
  • 16. Practitioner.identifier:TelematikID
    Slice NameTelematikID
    Definition

    An identifier that applies to this person in this role.

    ShortAn identifier for the person as this agent
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..1*
    TypeIdentifier(Identifier-Profil für die Telematik-ID)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Often, specific identities are assigned for the agent.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    18. Practitioner.identifier:LANR
    Slice NameLANR
    Definition

    An identifier that applies to this person in this role.

    ShortAn identifier for the person as this agent
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier(Identifier-Profil für die Abbildung einer lebenslangen Arztnummer)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    Often, specific identities are assigned for the agent.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Practitioner.name
    Definition

    The name(s) associated with the practitioner.

    ShortThe name(s) associated with the practitioner
    Comments

    The selection of the use property should ensure that there is a single usual name specified, and others use the nickname (alias), old, or other values as appropriate.

    In general, select the value to be used in the ResourceReference.display based on this:

    1. There is more than 1 name
    2. Use = usual
    3. Period is current to the date of the usage
    4. Use = official
    5. Other order as decided by internal business rules.
    Control10..*
    TypeHumanName
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Requirements

    The name(s) that a Practitioner is known by. Where there are multiple, the name that the practitioner is usually known as should be used in the display.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Practitioner.name.use
    Definition

    Identifies the purpose for this name.

    Shortusual | official | temp | nickname | anonymous | old | maiden
    Comments

    Applications can assume that a name is current unless it explicitly says that it is temporary or old.

    Control0..1
    BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
    (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

    The use of a human name.

    Typecode
    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Requirements

    Allows the appropriate name for a particular context of use to be selected from among a set of names.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Practitioner.name.text
    Definition

    Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

    ShortText representation of the full name
    Comments

    Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    A renderable, unencoded form.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Practitioner.name.family
    Definition

    The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

    ShortFamily name (often called 'Surname')
    Comments

    Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

    Control10..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Alternate Namessurname
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Practitioner.name.given
    Definition

    Given name.

    ShortGiven names (not always 'first'). Includes middle names
    Comments

    If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Alternate Namesfirst name, middle name
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    30. Practitioner.name.prefix
    Definition

    Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

    ShortParts that come before the name
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    32. Practitioner.name.suffix
    Definition

    Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

    ShortParts that come after the name
    Control0..*
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    34. Practitioner.gender
    Definition

    Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

    Shortmale | female | other | unknown
    Control0..1
    BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
    (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

    The gender of a person used for administrative purposes.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Needed to address the person correctly.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Practitioner.birthDate
    Definition

    The date of birth for the practitioner.

    ShortThe date on which the practitioner was born
    Control0..1
    Typedate
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Needed for identification.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Practitioner.photo
    Definition

    Image of the person.

    ShortImage of the person
    Control0..*
    TypeAttachment
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Many EHR systems have the capability to capture an image of patients and personnel. Fits with newer social media usage too.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Practitioner.qualification
    Definition

    The official certifications, training, and licenses that authorize or otherwise pertain to the provision of care by the practitioner. For example, a medical license issued by a medical board authorizing the practitioner to practice medicine within a certian locality.

    ShortCertification, licenses, or training pertaining to the provision of care
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Practitioner.qualification.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    44. Practitioner.qualification.code
    Definition

    Coded representation of the qualification.

    ShortCoded representation of the qualification
    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from For example codes, see TI Practioner Qualificationshttp://terminology.hl7.org/ValueSet/v2-2.7-0360
    (extensible to https://gematik.de/fhir/directory/ValueSet/PractitionerQualificationVS)
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    46. Practitioner.communication
    Definition

    A language the practitioner can use in patient communication.

    ShortA language the practitioner can use in patient communication
    Comments

    The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

    Control0..*
    BindingThe codes SHOULD be taken from CommonLanguageshttp://hl7.org/fhir/ValueSet/languages
    (preferred to http://hl7.org/fhir/ValueSet/languages)

    A human language.

    Additional BindingsPurpose
    AllLanguagesMax Binding
    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Requirements

    Knowing which language a practitioner speaks can help in facilitating communication with patients.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

    Guidance on how to interpret the contents of this table can be found here

    0. Practitioner
    2. Practitioner.id
    Must Supporttrue
    4. Practitioner.meta
    Must Supporttrue
    6. Practitioner.meta.versionId
    Must Supporttrue
    8. Practitioner.meta.lastUpdated
    Must Supporttrue
    10. Practitioner.identifier
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Must Supporttrue
    SlicingThis element introduces a set of slices on Practitioner.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • pattern @ system
    • 12. Practitioner.identifier:TelematikID
      Slice NameTelematikID
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      TypeIdentifier(Identifier-Profil für die Telematik-ID)
      Must Supporttrue
      14. Practitioner.identifier:LANR
      Slice NameLANR
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier(Identifier-Profil für die Abbildung einer lebenslangen Arztnummer)
      Must Supporttrue
      16. Practitioner.name
      Control1..?
      Must Supporttrue
      18. Practitioner.name.text
      Control1..?
      Must Supporttrue
      20. Practitioner.name.family
      Control1..?
      Must Supporttrue
      22. Practitioner.name.given
      Must Supporttrue
      24. Practitioner.name.prefix
      Must Supporttrue
      26. Practitioner.name.suffix
      Must Supporttrue
      28. Practitioner.gender
      Must Supporttrue
      30. Practitioner.birthDate
      Must Supporttrue
      32. Practitioner.photo
      Must Supporttrue
      34. Practitioner.qualification
      Must Supporttrue
      36. Practitioner.qualification.code
      BindingUnless not suitable, these codes SHALL be taken from TI Practioner Qualifications
      (extensible to https://gematik.de/fhir/directory/ValueSet/PractitionerQualificationVS)
      Must Supporttrue
      38. Practitioner.communication
      Must Supporttrue

      Guidance on how to interpret the contents of this table can be found here

      0. Practitioner
      Definition

      A person who is directly or indirectly involved in the provisioning of healthcare.

      ShortA person with a formal responsibility in the provisioning of healthcare or related services
      Control0..*
      Is Modifierfalse
      Summaryfalse
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      2. Practitioner.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      4. Practitioner.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. Practitioner.meta.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      8. Practitioner.meta.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Practitioner.meta.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 10. Practitioner.meta.versionId
        Definition

        The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

        ShortVersion specific identifier
        Comments

        The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

        Control0..1
        Typeid
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Practitioner.meta.lastUpdated
        Definition

        When the resource last changed - e.g. when the version changed.

        ShortWhen the resource version last changed
        Comments

        This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Practitioner.meta.source
        Definition

        A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

        ShortIdentifies where the resource comes from
        Comments

        In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

        This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Practitioner.meta.profile
        Definition

        A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

        ShortProfiles this resource claims to conform to
        Comments

        It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

        Control0..*
        Typecanonical(StructureDefinition)
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. Practitioner.meta.security
        Definition

        Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

        ShortSecurity Labels applied to this resource
        Comments

        The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from All Security Labels
        (extensible to http://hl7.org/fhir/ValueSet/security-labels)

        Security Labels from the Healthcare Privacy and Security Classification System.

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Practitioner.meta.tag
        Definition

        Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

        ShortTags applied to this resource
        Comments

        The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

        Control0..*
        BindingFor example codes, see CommonTags
        (example to http://hl7.org/fhir/ValueSet/common-tags)

        Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Practitioner.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. Practitioner.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. Practitioner.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Practitioner.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        30. Practitioner.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. Practitioner.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. Practitioner.identifier
        Definition

        An identifier that applies to this person in this role.

        ShortAn identifier for the person as this agent
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Requirements

        Often, specific identities are assigned for the agent.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on Practitioner.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • pattern @ system
        • 36. Practitioner.identifier:TelematikID
          Slice NameTelematikID
          Definition

          An identifier that applies to this person in this role.

          ShortAn identifier for the person as this agent
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier(Identifier-Profil für die Telematik-ID)
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Often, specific identities are assigned for the agent.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Practitioner.identifier:LANR
          Slice NameLANR
          Definition

          An identifier that applies to this person in this role.

          ShortAn identifier for the person as this agent
          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..*
          TypeIdentifier(Identifier-Profil für die Abbildung einer lebenslangen Arztnummer)
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Often, specific identities are assigned for the agent.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Practitioner.active
          Definition

          Whether this practitioner's record is in active use.

          ShortWhether this practitioner's record is in active use
          Comments

          If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role.

          Control0..1
          Typeboolean
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Requirements

          Need to be able to mark a practitioner record as not to be used because it was created in error.

          Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Practitioner.name
          Definition

          The name(s) associated with the practitioner.

          ShortThe name(s) associated with the practitioner
          Comments

          The selection of the use property should ensure that there is a single usual name specified, and others use the nickname (alias), old, or other values as appropriate.

          In general, select the value to be used in the ResourceReference.display based on this:

          1. There is more than 1 name
          2. Use = usual
          3. Period is current to the date of the usage
          4. Use = official
          5. Other order as decided by internal business rules.
          Control1..*
          TypeHumanName
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          The name(s) that a Practitioner is known by. Where there are multiple, the name that the practitioner is usually known as should be used in the display.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. Practitioner.name.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          46. Practitioner.name.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Practitioner.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 48. Practitioner.name.use
            Definition

            Identifies the purpose for this name.

            Shortusual | official | temp | nickname | anonymous | old | maiden
            Comments

            Applications can assume that a name is current unless it explicitly says that it is temporary or old.

            Control0..1
            BindingThe codes SHALL be taken from NameUse
            (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

            The use of a human name.

            Typecode
            Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Requirements

            Allows the appropriate name for a particular context of use to be selected from among a set of names.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            50. Practitioner.name.text
            Definition

            Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

            ShortText representation of the full name
            Comments

            Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            A renderable, unencoded form.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. Practitioner.name.family
            Definition

            The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

            ShortFamily name (often called 'Surname')
            Comments

            Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

            Control1..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Alternate Namessurname
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. Practitioner.name.given
            Definition

            Given name.

            ShortGiven names (not always 'first'). Includes middle names
            Comments

            If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

            Control0..*
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Alternate Namesfirst name, middle name
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. Practitioner.name.prefix
            Definition

            Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

            ShortParts that come before the name
            Control0..*
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. Practitioner.name.suffix
            Definition

            Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

            ShortParts that come after the name
            Control0..*
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            60. Practitioner.name.period
            Definition

            Indicates the period of time when this name was valid for the named person.

            ShortTime period when name was/is in use
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summarytrue
            Requirements

            Allows names to be placed in historical context.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. Practitioner.telecom
            Definition

            A contact detail for the practitioner, e.g. a telephone number or an email address.

            ShortA contact detail for the practitioner (that apply to all roles)
            Comments

            Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific.

            Control0..*
            TypeContactPoint
            Is Modifierfalse
            Summarytrue
            Requirements

            Need to know how to reach a practitioner independent to any roles the practitioner may have.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. Practitioner.address
            Definition

            Address(es) of the practitioner that are not role specific (typically home address). Work addresses are not typically entered in this property as they are usually role dependent.

            ShortAddress(es) of the practitioner that are not role specific (typically home address)
            Comments

            The PractitionerRole does not have an address value on it, as it is expected that the location property be used for this purpose (which has an address).

            Control0..*
            TypeAddress
            Is Modifierfalse
            Summarytrue
            Requirements

            The home/mailing address of the practitioner is often required for employee administration purposes, and also for some rostering services where the start point (practitioners home) can be used in calculations.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. Practitioner.gender
            Definition

            Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

            Shortmale | female | other | unknown
            Control0..1
            BindingThe codes SHALL be taken from AdministrativeGender
            (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

            The gender of a person used for administrative purposes.

            Typecode
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Needed to address the person correctly.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. Practitioner.birthDate
            Definition

            The date of birth for the practitioner.

            ShortThe date on which the practitioner was born
            Control0..1
            Typedate
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Requirements

            Needed for identification.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. Practitioner.photo
            Definition

            Image of the person.

            ShortImage of the person
            Control0..*
            TypeAttachment
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Many EHR systems have the capability to capture an image of patients and personnel. Fits with newer social media usage too.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. Practitioner.qualification
            Definition

            The official certifications, training, and licenses that authorize or otherwise pertain to the provision of care by the practitioner. For example, a medical license issued by a medical board authorizing the practitioner to practice medicine within a certian locality.

            ShortCertification, licenses, or training pertaining to the provision of care
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            74. Practitioner.qualification.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            76. Practitioner.qualification.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            78. Practitioner.qualification.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            80. Practitioner.qualification.identifier
            Definition

            An identifier that applies to this person's qualification in this role.

            ShortAn identifier for this qualification for the practitioner
            NoteThis is a business identifier, not a resource identifier (see discussion)
            Control0..*
            TypeIdentifier
            Is Modifierfalse
            Summaryfalse
            Requirements

            Often, specific identities are assigned for the qualification.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. Practitioner.qualification.code
            Definition

            Coded representation of the qualification.

            ShortCoded representation of the qualification
            Control1..1
            BindingUnless not suitable, these codes SHALL be taken from TI Practioner Qualifications
            (extensible to https://gematik.de/fhir/directory/ValueSet/PractitionerQualificationVS)
            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            84. Practitioner.qualification.period
            Definition

            Period during which the qualification is valid.

            ShortPeriod during which the qualification is valid
            Control0..1
            TypePeriod
            Is Modifierfalse
            Summaryfalse
            Requirements

            Qualifications are often for a limited period of time, and can be revoked.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            86. Practitioner.qualification.issuer
            Definition

            Organization that regulates and issues the qualification.

            ShortOrganization that regulates and issues the qualification
            Control0..1
            TypeReference(Organization)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            88. Practitioner.communication
            Definition

            A language the practitioner can use in patient communication.

            ShortA language the practitioner can use in patient communication
            Comments

            The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

            Control0..*
            BindingThe codes SHOULD be taken from CommonLanguages
            (preferred to http://hl7.org/fhir/ValueSet/languages)

            A human language.

            Additional BindingsPurpose
            AllLanguagesMax Binding
            TypeCodeableConcept
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Requirements

            Knowing which language a practitioner speaks can help in facilitating communication with patients.

            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))